KM 930 GD-T3
Jeans Waistband Sewing Automation
A waistband sewing machine capable of attaching wide waistbands ranging from a minimum of 1 3/4″ to a maximum of 2 3/4″.
WIDE WAISTBAND RANGE: 1 3/4″ TO 2 3/4″
The AGM Special KM 930 GD-T3 model is designed to meet manufacturers’ demand for sewing wider waistbands.
ADJUSTABLE WAISTBAND CUTTING UNIT
Allows easy adjustment of waistband cutting distances at both entry and exit points directly from the control screen.
ADJUSTABLE STITCH REMOVAL OPTIONS
Stitch removal can be adjusted independently for the right and left needles.
6-NEEDLE MACHINE HEAD WITH NEEDLE TRANSPORT
A needle-transport machine head specially designed for AGM Special, operating with an adjustable 1/8″ needle gauge.
FEATURES
Capability to attach wide waistbands ranging from 1 3/4″ to 2 3/4″
6-needle chain stitch machine head with needle transport, specially designed for AGM Special
Software fully developed by AGM Special
Independently adjustable stitch removal for left and right needles
Additional rear puller roller located behind the cutting blade
Automatic cutting system at both entry and exit points
Specially designed guarded presser foot
Dual shock-absorber roller system for curved and straight waistbands
Automatic dual tension system preventing chain stitch looping
Crankcase cleaning system allowing easy oil replacement
User-friendly touchscreen interface with Turkish and English language options
OPTIONS
| Standard Set: Special set for a minimum of 1 3/4″ and a maximum of 2 3/4″ |
| Optional Sets: |
| Needle Gauge: 1/4″ |
| Number of Needles: Minimum 1, Maximum 4 |
| Set Width: Minimum 1 3/4″, Maximum 2 3/4″ |
TECHNICAL SPECIFICATIONS
| Machine Head: | 6-needle chain stitch with needle transport |
| Motor: | Direct-drive electronic servo motor |
| Table & Stand: | Adjustable L-type |
| Stitch Removal: | Independently adjustable stitch removal for left and right needles |
| Cutting Unit: | Separately adjustable cutting at entry and exit points |
| Presser Foot Lifting: | Automatic |
| Pulling Unit: | Additional reinforced rear puller roller system behind the blade |
| Needle Cooling: | Additional reinforced needle cooling system |
| Presser Foot: | Guarded presser foot |
| Roller Unit: | Dual shock-absorber roller system for curved and straight waistbands |
| Feed Adjustment: | Mechanical adjustment of roller pulling force (low–high) |
| Oil Drain: | Crankcase cleaning system enabling easy oil replacement |
| Air Pressure Support: | Additional roller air pressure system (to increase roller force) |
| Tension System: | Automatic dual tension system preventing chain stitch looping |
| Touchscreen: | User-friendly touchscreen with Turkish and English language options |
| Cutting Length: | 65 mm |
| Maximum Speed: | 3,200 rpm |
| Daily Capacity: | 1,300–1,600 pcs / 8 hours |
| Net Weight: | 98 kg |
| Gross Weight: | 111 kg |
| Dimensions: | 60 × 100 × 130 cm |
| Air Pressure: | 6 bar |
| Voltage: | 220–240 V, 60 Hz |
| Power: | 2,400–2,800 W |
